Fairing removal

Seats, side covers, lower, middle and upper fairings — Kawasaki Ninja 400 (2018–2023), 12 steps.

Category: Bodywork

Order follows the Frame chapter of the service manual. Step texts are condensed; see the linked manual pages for exact wording and figures.

  1. Step 1: Rear seat

    Insert the ignition key into the seat lock, turn it and pull up the front part of the rear seat. Remove the seat forward.

    Parts: Rear Seat

    Manual: Ch. 15 Frame › Seats

  2. Step 2: Front seat

    Pull the seat lock cable backward while pulling up the rear part of the front seat. Remove the front seat.

    Parts: Front Seat

    Manual: Ch. 15 Frame › Seats

  3. Step 3: Side covers

    On each side remove the bolt and the bolt with washer. Pull the side cover outward to clear its projections from the grommets.

    Parts: Side Cover (left), Side Cover (right)

    Manual: Ch. 15 Frame › Side Cover Removal/Installation

  4. Step 4: Lower fairings

    Remove the quick rivet, the bolts with washers and the bolt with collar. Pull the lower part of the fairing outward to clear the tabs, then remove it.

    Parts: Lower Fairing (left), Lower Fairing (right)

    Manual: Ch. 15 Frame › Fairings

  5. Step 5: Lower inner fairing

    Remove the bolts and the quick rivets on both sides. Pull the lower inner fairing to clear the tabs on both sides and remove it.

    Parts: Lower Inner Fairing

    Manual: Ch. 15 Frame › Fairings

  6. Step 6: Front turn signal connectors

    Disconnect the front turn signal light lead connectors. On the left side also remove the fuse boxes from the middle fairing.

    Parts: Front Right / Front Left Turn Signal Light Lead Connector, Fuse Box (1), Fuse Box (2)

    Manual: Ch. 15 Frame › Fairings

  7. Step 7: Middle fairings

    Remove the bolts with washers and the quick rivet. Pull the middle fairing outward to clear the projections and the tab, and remove it together with the turn signal light.

    Parts: Upper Middle Fairing (left), Upper Middle Fairing (right), Lower Middle Fairing (left), Lower Middle Fairing (right), Fin (left middle fairing), Fin (right middle fairing), Turn Signal Light Cover (left), Turn Signal Light Cover (right), Bracket (left middle fairing, rear blade), Bracket (left middle fairing, at turn signal), Front Turn Signal Light (left) with bracket, Front Turn Signal Light (right) with bracket, Front Turn Signal Lens (left), Front Turn Signal Lens (right)

    Manual: Ch. 15 Frame › Middle Fairing Installation

  8. Step 8: Middle fairing pads

    Take off the foam pads that sit behind the middle fairings (in the manual the pad is fitted on the left side only).

    Parts: Pads (middle fairing)

    Manual: Ch. 15 Frame › Fairings

  9. Step 9: Mirrors and windshield

    Remove the mirror bolts, the rear view mirrors and the windshield. On installation tighten the mirror bolts to 8.8 N·m.

    Parts: Rear View Mirror (left), Rear View Mirror (right), Windshield

    Manual: Ch. 15 Frame › Fairings

  10. Step 10: Headlight connector

    Disconnect the headlight lead connector and open the harness clamp.

    Parts: Headlight Lead

    Manual: Ch. 15 Frame › Fairings

  11. Step 11: Upper fairing

    On both sides remove the quick rivet, screw, bolt with washer and headlight mounting bolt. Move the upper fairing forward to free it from the grommets. Headlight mounting bolts on installation: 8.8 N·m. The headlight unit comes off together with the upper fairing.

    Parts: Upper Fairing, Pads (upper fairing), Bracket (under upper fairing), left, Bracket (under upper fairing), right, Headlight (LED) Assembly, Headlight Lens (left), Headlight Lens (right), Headlight LED Modules (low / high beam), Headlight Beam Adjusters (horizontal and vertical), Headlight Pads (foam strips)

    Manual: Ch. 15 Frame › Fairings; Ch. 16 Electrical System › Lighting System

  12. Step 12: Upper inner fairing

    Slide the dust cover and disconnect the meter connector. Remove the bolt and washer on each side, pull the fairing up and clear its projections.

    Parts: Upper Inner Fairing

    Manual: Ch. 15 Frame › Upper Inner Fairing Removal/Installation

All bodywork is off. Installation is the reverse of removal; check that the grommets and clip nuts are in place first.

Service manual

More procedures